Osmo Stone and Terracotta Oil [Exterior] Clear
STORE PICK UP
Do you need your product right away! Can't wait for the courier to deliver your parcel!
Use our store pick up service where you can order online and collect your products the same day.
We are open 7 days a week, but please make sure to check our opeing times before making your journery.
DELIVERY INFO
For our smaller items we offer standard delivery at a charge of £4.95 and for our larger items £10.95. We do also offer an express service if your need your order within 1 to 2 working days.
If you have ordered extra large or bulky products weigh more than 30 kg it will require a specific delivery quote. This will be emailed to you after placing your order, and the amount must be paid before we can ship your items. Please select this at checkout.
Please keep in mind that these delivery charges are only applicable to mainland UK, and certain remote areas may have additional delivery charges after purchase.
VAT INCLUDED
VAT is already included with all our retail products, set at the national value added tax rate.
Osmo Stone and Terracotta Oil [Exterior] Clear
Osmo Stone and Terracotta Oil [Exterior] Clear offers superior protection for exterior stone and terracotta surfaces. Its unique oil combination provides protection against dirt and abrasion and a highly water-repellent, microporous finish which does not crack, peel, flake, or blister. Ideal for terracotta, granite, limestone, and slate.
Technical Information
- Size: 2.5 Litre
- Finish: Clear Satin
- Dry Time: 8-10 hours
- Coverage: 32m²/L with one coat
- Recommended Use: Exterior stone, terracotta, patio and paving surfaces
- Coats: 2 coats & recoat when signs of wear become visible
Care Instructions
Regular Cleaning: Damp cleaning with Osmo Decking Cleaner using Osmo Decking Cleaning Brush.
Occasional Maintenance: If necessary, intensive cleaning and refreshing using Osmo Wood Reviver Power Gel or Osmo Gard Clean.
Recoating: Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
Method of Application
With Osmo Flat Brush, Floor Brush, Oil Finish Applicator Fleece (Hand Pad Holder) or Osmo Microfibre Roller, apply very thinly and spread well.
Remove any excess product (pooling or streaking) with a pad or a lint-free cloth. For larger areas, remove excess oil with a rubber scraper and polish with a buffing machine (white pad). Important: the liquid oil must be absorbed into the surface. There must not be any oil left on the surface. This is so important to avoid slipperiness with this product – especially when walked-on areas are wetted by rain!
Allow to dry for 8-10 hours. Ventilate well while drying. Apply the second coat also very thinly. Again, remove any excess. When renovating already oiled surfaces, normally one coat on a cleaned surface is sufficient.